Common implementation standards for arresters (requirements vary from country to country) :GB18802.1-2002.UL1283Filter, GB11032-2010,IEC61643-1,IEC60099-4,IEEE.C62.11,UL1449.2 nd EditionChina's li...
1. Install the arrester near the power distribution transformerMetal oxide arrester (MOA) is connected in parallel with the transformer in normal operation. The upper end is connected to the line and ...
Anti pollution flashover coating, as a power safety protective coating, mainly serves to prevent electric discharge and pollution flashover.So, the prices of anti fouling flashover coatings in shoppin...
In March of each year, the annual power spring inspection comes again, and power workers who have not yet rested start to engage in busy work. The spring inspection of power facilities is like a physi...
In daily operation, the pollution condition of the porcelain bushing surface of the arrester should be checked, because when the porcelain bushing surface is seriously polluted, the voltage distributi...
RTV silicone rubber is a silicone rubber that cures at room temperature. It can be obtained as a one-ingredient product or from a mixture of two ingredients (base and cure). Manufacturers offer hardne...
Generally, under severe weather conditions such as fog, dew, drizzle and other environments, flashover will occur along the wet insulator surface, which will cause pollution flashover accidents in the...
Large CapacityThis is mainly reflected in the arrester having the ability to absorb all kinds of lightning overvoltage, power frequency transient overvoltage, and operating overvoltage. The flow capac...
English
